TrueAlert ES Multi-Tone Horns

Features selectable tones, more effective signals, and easy reporting

Autocall TrueAlert ES Multi-Tone Appliances feature selectable tones, including a 520Hz signal that is more effective at waking sleeping building occupants and meets NFPA 72 requirements for certain sleeping areas. The perfect fire detection system is energy-efficient, dependable, easy to maintain and excellent at alerting occupants when there’s an emergency. TrueAlert ES addressable notification appliances deliver all this and more.

NFPA-compliant, 520Hz low-frequency sounder is more effective at waking sleepers
Compliance reporting is easy with each appliance test history stored and quickly retrieved from the control unit
Appliances and speakers automatically synchronize across the control unit and the entire network loop

TrueAlert ES Multi-Tone Horns

Specialized Selectable Tones for Added Protection

TrueAlert ES fully addressable multi-tone horns provide critical audible and visible notification to occupants during emergencies. These wall-mounted appliances feature seven selectable tones, including a 520Hz tone that meets NFPA 72 requirements for certain sleeping areas and is proven by research to be more effective at waking occupants. Each tone has a high and low decibel (dBA) setting and strobes can be set at candela ratings from 15 to 185. Programming can be done through the control panel, eliminating the need to go to each appliance or set manually at the device. The combination of available tones and patterns makes possible 19 selectable alert and warning sounds. 520Hz Horn, Broadband Horn, Bell and Chime tones can be used to produce Temporal pattern, March Time pattern or a Continuous tone. As part of the TrueAlert ES family, these multi-tone appliances are fully supervised and support flexible designs and wiring infrastructure. Their revolutionary self-test capability can help save time and eliminate disruption to building occupants during inspection and service.

Features

Critical audio and visible notification during emergencies:These wall-mounted appliances feature seven selectable tones with high and low decibel (dBA) setting. Strobes can be set at candela ratings from 15 to 185.
Easy configuration and service:Appliance programming can be done at the appliance or through the control unit, eliminating the need to go to each appliance. If an appliance needs to be replaced, the new unit can automatically inherit the settings of the appliance it replaced.
Faster, easier, lower-cost installation:Addressable technology, t-tap capability and a flexible wiring scheme make it possible to significantly cut installation time and cost, often using smaller gauge, unshielded wiring.
Automatic ADA compliance:All TrueAlert ES appliances on a network loop are automatically synchronized to meet ADA requirements and no special programming, wiring or adapter modules are required.

NFPA compliant low frequency sounder:TrueAlert ES Multi-Tone Horns can generate a 520Hz tone that meets NFPA 72 requirements for certain sleeping areas and is proven by research to be more effective at waking occupants.
Self-testing capability:All the horns, strobes and horn/strobes on the system can be tested in seconds, even automatically, without a technician onsite and without disrupting building occupants and operations.
Stronger documentation and reporting capabilities: Appliance information and test history are stored and can be easily retrieved from a Autocall ES panel to generate compliance reports.